9-piece cutters + case KD11876
Carbon steel tubular cutters

They enable holes to be made by striking the punch head with a hammer.

They have holes for removing cut material.

They are ideal for making holes in materials such as leather, soft plastics, rubber, balsa, foams, cardboard, textiles, etc.

The set includes cutters with the following diameters:

0.5 mm
1 mm
1.5 mm
2 mm
2.5 mm
3 mm
3.5 mm
4 mm
4.5 mm
5 mm
EASY AND EFFECTIVE USE OF THE SET
After selecting the appropriate size of the cutter, place it on the material to be cut at a right angle (90°) and then hit it with a hammer.

The surface underneath the workpiece should be flat and not too hard. Ideally, place a piece of soft wood, leather, or plastic underneath.

Thanks to this type of use, the set will last much longer.

The set is used to make holes in materials such as:

skin
eco-leather
soft plastics
rubber
balsa
foam
cardboard
textiles etc.
Parameters

Material: #45 carbon steel
Application: cutting round holes | shoemaking | leatherwork | saddlery | tailoring | leather | imitation leather | rubber | cardboard
Surface finish: knurled|hardened
Working part finish: sandblasted|polished
Diameter: 2.5|3|4|5|6|7|8|9|10 mm
Number of pieces in the set: 9

Prices vat included

For Free delivery in malta minimum order is Eu 50.00
BILLY ENGINEERS 44 CROSS ROAD MARSA