22pcs Universal Disc Caliper Brake Piston Rewind Tool Kit Set Wind Back
€ 1.00
Description
This brake caliper wind back tool set is required for the rewinding of pistons back into the core when replacing worn pads, brake discs or brake shoes. This set of 22 pieces is universally applicable for almost all common brands of cars. This set is necessary especially for those vehicles with an integrated hand brake in the brake caliper, which means the hand brake's cable acts directly on the piston of the disc brake.
Feature
The brake piston tool includes left and right handed bolt assemblies (one of each). The 17 adaptors enable the rewinding of pistons back in the core on most disc brake calipers with little effort. The ingenious design allows a steady rewinding of the pistons without tilting them, while the sleeve is protected from damage at the same time.
The correct parts to fit almost all cars including Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, GM General Motors, Honda, Hyundai, Jaguar, KIA, Mazda, Mercedes-Benz, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rover, Saab, Seat, Skoda, Smart, Subaru, Toyota, VW Volkswagen, Volvo
This Universal Brake Caliper Wind Back Tool Set is delivered in a robust hard case into which item clips safely for secure transport. Easy classification of the adaptors regarding the manufacturers due to the punching.
Specification
Contents of the tool box
2 threads: right and left-hand threaded tools
2 support plates
17 adapters for the most common brands of car
Plastic case
Material and size of the kit: C45 metal tools / plastic box
The codes for the part needed for each car manufacturer are:
- 0 = part 1 = General Motors, Vauxhall (2-1/2" single pin disc)
- 1 = part 2 = Plate
- 2 = part 3 = Citroen, Fiat, Peugeot (2-1/64" disc plate)
- 3 = part 4 = Audi, Alfa Romeo, Audi, Rover, BMW, Ford, Honda, Jaguar, Mercedes, Mitsubishi, MG, Nissan, Rover, Toyota, Volkswagen, Volvo (2-5/32" three pin disc)
- 4 = part 5 = Alfa Romeo, Ford, Mazda, Peugeot, Honda, GM, Saab, Seat, Skoda, Subaru, Vauxhall, Volkswagen, Volvo (1-1/4" no pin disc)
- 5 = part 6 = Adapter 3/8"
- 6 = part 7 = Audi, Nissan, Volkswagen (1-21/32" two pin disc)
- 7 = part 8 = Audi, Rover, Subaru, Ford, Honda, Nissan , Peugeot, Rover, Saab, Seat, Skoda, Toyota, Vauxhall, Volkswagen (1-21/32" 2 pin disc)
- 8 = part 9 = GM, Opel,Vauxhall (1-7/8" single pin disc)
- 9 = part 10 = GM, Opel, Vauxhall (2-1/8" single pin disc)
- A = part 11 = Citroen, Fiat, Peugeot, Renault (1-3.16" two pin disc)
- E = part 12 = Nissan (1-21/32" four pin disc)
- F = Part 13 = Opel, Vauxhall (1-1/4" two pin disc)
- L = Part 14 = Left Hand Spindle
- K = Part 15 = Citroen, Fiat, Peugeot, Renault (2-1/18" two pin disc)
- M = Part 16 = Ford (1-1/4" two pin disc)
- N = Part 17 = Saab, Honda (1-1/4" hex disc)
- R = part 18 = Right Hand Spindle
- O = part 19 = plate
- K1 = part 20 = 2-1/8" two pin disc
- K2 = part 21 = 1-25/32" two pin disc
- 22 = part 22 = blow mould case
Feature
The brake piston tool includes left and right handed bolt assemblies (one of each). The 17 adaptors enable the rewinding of pistons back in the core on most disc brake calipers with little effort. The ingenious design allows a steady rewinding of the pistons without tilting them, while the sleeve is protected from damage at the same time.
The correct parts to fit almost all cars including Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, GM General Motors, Honda, Hyundai, Jaguar, KIA, Mazda, Mercedes-Benz, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rover, Saab, Seat, Skoda, Smart, Subaru, Toyota, VW Volkswagen, Volvo
This Universal Brake Caliper Wind Back Tool Set is delivered in a robust hard case into which item clips safely for secure transport. Easy classification of the adaptors regarding the manufacturers due to the punching.
Specification
Contents of the tool box
2 threads: right and left-hand threaded tools
2 support plates
17 adapters for the most common brands of car
Plastic case
Material and size of the kit: C45 metal tools / plastic box
The codes for the part needed for each car manufacturer are:
- 0 = part 1 = General Motors, Vauxhall (2-1/2" single pin disc)
- 1 = part 2 = Plate
- 2 = part 3 = Citroen, Fiat, Peugeot (2-1/64" disc plate)
- 3 = part 4 = Audi, Alfa Romeo, Audi, Rover, BMW, Ford, Honda, Jaguar, Mercedes, Mitsubishi, MG, Nissan, Rover, Toyota, Volkswagen, Volvo (2-5/32" three pin disc)
- 4 = part 5 = Alfa Romeo, Ford, Mazda, Peugeot, Honda, GM, Saab, Seat, Skoda, Subaru, Vauxhall, Volkswagen, Volvo (1-1/4" no pin disc)
- 5 = part 6 = Adapter 3/8"
- 6 = part 7 = Audi, Nissan, Volkswagen (1-21/32" two pin disc)
- 7 = part 8 = Audi, Rover, Subaru, Ford, Honda, Nissan , Peugeot, Rover, Saab, Seat, Skoda, Toyota, Vauxhall, Volkswagen (1-21/32" 2 pin disc)
- 8 = part 9 = GM, Opel,Vauxhall (1-7/8" single pin disc)
- 9 = part 10 = GM, Opel, Vauxhall (2-1/8" single pin disc)
- A = part 11 = Citroen, Fiat, Peugeot, Renault (1-3.16" two pin disc)
- E = part 12 = Nissan (1-21/32" four pin disc)
- F = Part 13 = Opel, Vauxhall (1-1/4" two pin disc)
- L = Part 14 = Left Hand Spindle
- K = Part 15 = Citroen, Fiat, Peugeot, Renault (2-1/18" two pin disc)
- M = Part 16 = Ford (1-1/4" two pin disc)
- N = Part 17 = Saab, Honda (1-1/4" hex disc)
- R = part 18 = Right Hand Spindle
- O = part 19 = plate
- K1 = part 20 = 2-1/8" two pin disc
- K2 = part 21 = 1-25/32" two pin disc
- 22 = part 22 = blow mould case
Item Details
7660794
1284
Everything Else
30/01/2019
New