C4816 6mm M14 €21.00c
C4817 8mm M14 €21.00c
C4818 10mm M 14 €22.00c
C4819 12mm M14 €22.00c
C4822 16mm M14 €22.00c
C4824 20mm M14 €22.00c
C4826 25mm M14 €26.00c
C4829 30mm M14 €30.00c
C4831 35mm M14 €45.00c
C4834 45mm M14 €47.00c
C4835 50mm M14 €59.00c
C4837 55mm M14 €60.00c
C4840 68mm M14 €71.00c
C4844 82mm M14 €96.00c

Description:

high-quality diamond hole saw for dry drilling.
Equipped with a handle with M14 thread for direct mounting on an angle grinder.
Intended for making holes, among others in stoneware, porcelain stoneware, ceramics, roof tiles, natural stone, granite and marble.
Crown packed in a plastic tube with a hole for hanging on a hook.
The maximum operating speed is 14,000 rpm.
The side holes of the crown provide better cooling and allow the removal of debris after drilling each hole. The life of the hole saw depends on the type of material being processed, its thickness, and appropriate cooling and use. In order to maximize its service life, the following rules should be followed:
- use with devices that provide the appropriate working speed
- dry hole saw, so DO NOT use water as a coolant
- start drilling holes by applying the crown at an angle of about 30 degrees to the material being processed and then use circular movements, as shown in the illustrative photo in the gallery
- before each with subsequent drilling, check and clean the center of the crown

Prices vat included

For Free delivery in malta minimum order is Eu 50.00
BILLY ENGINEERS 44 CROSS ROAD MARSA